Відео

Cars and trucks should have that arrangement; makes the load on your power steering pump or your arms (non power steering) so much less. Also to make steering your mower even better, while carrying your beverage along, do what I did with the landlord's John Deere rider and put a "Brodie knob" on the wheel.

There's a reason the machine wasn't designed with these included and ding, ding, ding...you guessed it, debris! Those bearings aren't gonna last any time at all before they fail and lock up. There goes your "hack" smh

Can this be done on a dirtbike tire?

Does this only happen when it was empty? Or did it also happen when filling up on quarter full? I appreciate your response, I'm trying to diagnose my Camry 2018.

Wrap the electronics in plastic walmart bag!

I used a 4 1/2 inch flapper disc (40 grit) on an angle grinder. This will strip that rusty surface down to shiny metal in no time. Use a wire wheel for the perimeter and a small wire cup for the corners. The first time I did this I used only a wire wheel. It was a pain and took a long time. Using the flapper disc cut the job in half.

Absolute A+ for effort! Love the attention to detail.

How bad does that fence stink?

This mod will greatly extend the life of your steering gear and rack also.

The BEST VIDEO EVER!!! 👍👍Well out of the last 4 Or 5 I watched anyway 😊

Once all the air is out do you lock the air valve again??

So you showed doing this to only one side which looks like the slave side and not the side with the steering shaft.. so do I do this to both sides or only the one side like your video shows?

Just tried this and it worked the first time on a Kenmore HE4 unit. Very pleased I found this video!

Good overall video but the fact is; Tire pressure setting is on the door jamb sticker and its defiantly not 38, I believe its 32/30 on that Model Year. That will make a difference in how the VSA module determines whether is getting low based on rotation of the tire

Agree with doing it yourself if possible to avoid being ripped off. Appreciate your helpful videos, good stuff! Thx! ⭐️🇺🇸😎

thanks to the video it took 10 minutes . Thank you!

Do you still have your RSX? Those videos are how I found your channel.

Nice!

Gotta go buy a swivel at harbor freight now 😅

Those look like some really old ventures, like from the late 90s

Truth be told, a slightly higher action sounds better and these modifications shouldn`t be necessary on a well engineered instrument. If you want Les Paul action then play a LP. The benchmark for guitar, is actually the gut string classic instrument itself. If I eat cereal, I choose oatmeal, not Lucky Charms.

⭐️👍😎

Hey, I'am super interested in your Donner Drum Module to Alesis video. Did you get everything working with this swap out?

Would the odor fade fairly quickly if used on my garden railway ties?

Ty

My filter lasted only one week 🙄

I have a 4 cylinder will it's sound good?

Had this issue today. Thought my belt was stretched out and toast. Watched this video and then realized that I watched this exact same video last year when I had the same problem. Fixed it again. See you again next year when I can’t figure out why the mower doesn’t want to go. I guess us old guys with bad memories are good for the view count, if nothing else. Hahaha.

This is THE BEST exhaust video I've seen to date. I'm gonna order this one. Thanks for posting

Says it uses no electricity, then goeson to build a fan that runs on electricity.

TELL THE ENVIROMENTALIST TO GO TO HELL

I know a better use, snowmobile steering use the same design and they are notorious for stiff steering in cold temperatures!

Second best hack is to replace the wheel bushings with wheel bearings. It will make the wheel spindle last forever. Just YT search.

okay what if they car had gas, then it ran out and i added some after 2 months

Nice job. Too bad they didn't have a big display. It could show everything at once and possible bigger text. Looks like they have room

Way better but there is still yellow parts on the bottom but nobody sees that part unless you kick them.

Isnt this just common sense? We change out our filter cartidge about every 3 or 4 days. Swap it out for a clean one then soak then dirty one and get it clean for the next swap...

I'm going to find out when daylight hits thank you

This is the way. The wire wheel was good start. Mine had a lot of junk and rust. A carbide grinder disc aided that problem. Came out perfect.

Did not help me one bit tho it seems logical same mower same bearings just did not help my mower a waste of time

Thanks for the info. Good video

A knob?

You might have another fake in your hands. Colorway on the box should also say Industrial blue. Sizetag also doesnt look right.

Is 172 always o2 senor

How is this deck doing 6 years later?

My tractor has four-wheel steer. I wonder what additional parts I would need.

I’m a little late but thanks. The instructions included with my kit said 30 minutes and you’re done. 4 hours later reviewing many videos I finally found your video. You explain that a 6” extension and a swivel allow you to remove the bottom bracket. My collection of tools did not allow me to remove the nut as I was missing the essential combination. You alone took the time to explain the necessary tools. For that I’m grateful. 😊

I really think you got a few things quite wrong, buddy. I'm sorry for the instrument

Hi I have a f150 1995 shift stick and when aI drive it and pus de gas is no power is berry bead what could be wrong..I'm in California...

It's amazing, but I'm looking for restoration of natives plants so, this being genetically altered is out for me. Still amazing